Replacing the wiper blades on your 2015 Silverado is a simple task that can be completed in a few minutes with the right tools. You'll need a new set of wiper blades, a screwdriver, and a pair of pliers.
Start by lifting the wiper arm away from the windshield. You may need to use a screwdriver to pry the arm up. Once the arm is up, use the pliers to remove the old wiper blade from the arm.
Materials you'll need
Before you begin, you will need to gather a few materials. These include a new set of wiper blades, a clean rag, and a pair of pliers. You may also want to have a small bucket of water on hand to help you clean the windshield.
Once you have gathered your materials, you can begin the process of changing your wiper blades. Start by lifting the wiper arm away from the windshield. Be careful not to bend or break the arm. Once the arm is lifted, you can use your pliers to remove the old wiper blade. Be sure to hold onto the blade firmly so that it does not fall off and hit you.
Step 1: Lift the wiper arm
Step 2: Locate the release tab
Locate the release tab on the wiper arm. It is usually a small, plastic tab that is located near the base of the wiper arm, where it attaches to the windshield. The release tab may be different depending on the make and model of your vehicle, but it is typically a small, plastic tab that is located near the base of the wiper arm, where it attaches to the windshield.
Once you have located the release tab, press it down and pull the wiper arm away from the windshield. The wiper blade should come off easily. If it does not, you may need to use a screwdriver or other tool to pry it off.
Step 3: Slide the wiper blade off
Now that the wiper blade is lifted straight up from the windshield, you should slide it off of the wiper arm. You should not lift it any more than necessary since doing so could damage the arm. While it may take a small amount of force to slide it off, wiggling and rocking it should help it come off the easiest. Just avoid using too much force since it could also damage the arm.
Once the wiper blade has been removed, you must be careful that it does not snap back into place. To prevent this, you should tie the wiper arm to the windshield. You can use a bungee cord to do this, which is commonly recommended. However, if you do not have any bungee cords you can use a piece of string, rope, or anything else that is long enough to reach from the end of the wiper arm to the windshield.
Now that the wiper arm is tied to the windshield and the old wiper blade has been removed, you can prepare to install the new wiper blade. If you are doing this for the rear windshield, the process of replacing the old blade will be the same as well as the process of installing a new wiper blade.
The final step in the process of replacing the wiper blade is to install the new wiper blade. To do this, you should slide it over the wiper arm. The wiper arm should slide easily into the slot on the wiper blade and snap into place. Once it does, you should pull down on the wiper blade to make sure that it is secure. You can now release the wiper arm from the windshield since the new wiper blades have been installed.
Step 4: Align the new wiper blade
Once the new wiper blade is in place, you need to align it with the windshield. To do this, simply hold the wiper blade against the windshield and move it back and forth a few times. This will help to ensure that the blade is making good contact with the glass.
Once the blade is aligned, you can tighten the nut or bolt that holds it in place. Be sure to tighten it securely, but do not overtighten it.
Now that the new wiper blade is installed and aligned, you can test it out by turning on the wipers. Make sure that the blade is wiping the windshield cleanly and without streaking.
Step 5: Snap the new wiper blade into place
Once you have the new wiper blade in hand, it's time to snap it into place. To do this, locate the small tab on the end of the wiper arm. Press down on the tab while simultaneously pulling the old wiper blade straight up. The old blade should come right off.
Now, take the new wiper blade and align it with the wiper arm. Push down on the new blade until you hear a click. This means that the blade is securely in place.
Repeat this process for the other wiper blade.
Your new wiper blades are now installed and ready to use. Enjoy the clear view!
Step 6: Lower the wiper arm
In this step, you need to lower the wiper arm. To do this, push the tab on the wiper arm towards the windshield. This will release the arm and you can lower it to a vertical position. Be careful not to let the arm snap back into place, as this could damage the windshield.
Once the wiper arm is lowered, you can remove the old wiper blade by pulling it straight out of the arm. To install the new wiper blade, simply slide it into the arm until it clicks into place. Make sure that the new wiper blade is facing the correct direction, with the rubber edge facing the windshield.
Step 7: Repeat for the other wiper blade
Once you have removed the old wiper blade from one side of your truck, it is time to repeat the whole process for the other side. The steps involved in changing the other wiper blade are exactly the same as the ones you followed for the first one. Make sure you pay close attention to how the wiper arm is attached to the blade and follow the steps in the correct order to avoid any damage.
When you are replacing the new wiper blade, make sure that it is properly aligned with the wiper arm. This will ensure that the blade makes contact with the windshield evenly and provides a clear view while driving.
Once you have replaced both wiper blades, test them out by turning on the wipers and ensuring that they are working correctly. If there are any issues, you can go back and check if the blades are properly installed or if there are any other problems with the wiper system.
Tips
**Tips:**
1. Replace your wiper blades twice a year, or more often if you live in an area with harsh weather conditions.
2. Choose the right wiper blades for your vehicle. There are many different types of wiper blades available, so make sure to select the ones that are the right size and type for your Silverado.
3. Follow the manufacturer's instructions for installing your new wiper blades.
4. Test your new wiper blades before driving your vehicle. This will help you to ensure that they are working properly.
Troubleshooting
If you are having trouble changing the wiper blades on your 2015 Silverado, there are a few things you can do to troubleshoot the issue.
First, make sure that you have the correct size wiper blades for your vehicle. You can find this information in your owner's manual or by consulting with a parts specialist at your local auto parts store.
Next, check to make sure that the wiper arms are properly aligned. If the wiper arms are not aligned correctly, the wiper blades will not be able to make proper contact with the windshield, which can result in streaking or skipping.
Finally, make sure that the wiper blades are properly installed. The wiper blades should be snapped into place securely, and there should be no gaps between the wiper blades and the windshield.
Frequently Asked Questions
What is the correct size of wiper blades for a 2015 Silverado?
The correct size of wiper blades for a 2015 Chevrolet Silverado is 26 inches for the driver's side and 18 inches for the passenger side.
What type of wiper blades are recommended for a 2015 Silverado?
The best type of wiper blades for a 2015 Silverado are beam-style wiper blades. These blades are designed to provide a more consistent wipe across the windshield and are less likely to chatter or skip.
How often should I replace the wiper blades on my 2015 Silverado?
You should replace the wiper blades on your 2015 Silverado every 6 to 12 months, or more frequently if you live in an area with harsh weather conditions.
Can I change the wiper blades on my 2015 Silverado myself?
Yes, you can change the wiper blades on your 2015 Silverado yourself. It is a relatively easy process that can be completed in a few minutes.
Conclusion
Congratulations! You have now successfully changed the wiper blades on your 2015 Silverado. Make sure to check the blades regularly for wear and tear, and replace them as needed to ensure optimal visibility while driving.
If you have any questions or concerns, please consult your vehicle's owner's manual or a qualified mechanic for further assistance.